Field Description
Max. preheat time
This value only takes effect if the machine is connected with Easy-
Net Control Center and if the option "Heatup optimization" of
EasyNet is used.
This value defines how long the used material is allowed to be on
operating temperature without any impairment of the material
characteristics.
Optimize mold heating
Optimizing of all hot runner zones. Function is used to balcance
possible temperature fluctuations when changing set tempera-
tures of different hot runner zones.
4.49 Hot runner Setup Advanced
4.49.1 Purpose
In this mask the settings for the single zones of the mold heating (hot runner)
system are set.
4.49.2 Description of the mask
For zones 1-n, the mode, sensor type, mold heating type and the maximum
evaporation power can be set.
Fig.4-53: Mask "Hot runner Setup Advanced"
Description of the operating masks
KePlast.HMI.KVB
© KEBA 2016
User's manual V3.05126
To Next Page
Loading...
Need help?
General
