Field Description
Core signal 1 connection
Allocatation of a core of the machine to the euromap signal core1.
Function is only displayed when Euromap 12 or Euromap 67 in-
terface is selected.
Core signal 2 connection
Allocatation of a core of the machine to the euromap signal core2.
Function is only displayed when Euromap 67 interface is selected.
4.52 Production settings - Tab2
4.52.1 Purpose
Parameters for the production processs can be set in this mask.
4.52.2 Description of the mask
For each weekday a starting time for auto heatup of the nozzle heating and
the mold heating can be configured.
Information
In order to start the heater at the configured starting times the machine itself
has to be turned on.
Fig.4-56: Mask "Production settings - Tab2"
KePlast.HMI.KVB
Description of the operating masks
© KEBA 2016
User's manual V3.05 131
To Next Page
Loading...
Need help?
General
