Keba Kemro K2 User Manual

Maximum movement time
Field Description
Max. forward time
The left field Actual displays the current time for the ejector for-
ward movement. The maximum permitted time until the ejector is
forward is specified in field Limit. If this time is exceeded an alarm
will be triggered and the cycle is stopped. The difference between
the two values is shown in the right field Differ.
Max. backward time
The left field Actual displays the current time for the ejector for-
ward movement. The maximum permitted time until the ejector is
backward is specified in field Limit. If this time is exceeded an
alarm will be triggered and the cycle is stopped. The difference
between the two values is shown in the right field Differ.
Movement start delay
Field Description
Forward delay The delay time for the ejector forward movement is adjusted here.
Backward delay
The delay time for the ejector backward movement is adjusted
here.
Setup mode output
Field Description
Setup mode output forward
Pressure and velocity output for the ejector forward movement in
setup mode.
Setup mode output back-
ward
Pressure and velocity output for the ejector backward movement
in setup mode.
4.19 Ejector Setup Advanced
4.19.1 Purpose
Additional parameters for the ejector can be configured within this mask.
4.19.2 Description of the mask
For the ejector movement the minimum profile outputs, maximum ramp set-
tings and pump and valve delay times can be set.
Description of the operating masks KePlast.HMI.KVB
© KEBA 2016
User's manual V3.0574

Keba Kemro K2 Specifications

General

Brand	Keba
Model	Kemro K2
Category	Controller
Language	English