Keba Kemro K2 User Manual

4.100.3 Description of the elements
Flow
Field Description
Absolute flow pump n
The maximum absolute flow for the n-th pump can be specified
here.
Screw
Field Description
Max. revolution Specification of maximum screw revolutions.
Screw gain Impulses per screw rotation.
Pressure and clamping force
Field Description
Max. system pressure
pump n
Specification of the maximum system pressure for the n-th pump.
Max. backpressure Specification of the maximum backpressure.
Max. mold adjust pressure Specification of the maximum mold adjust pressure.
Max. mold adjust velocity Specification of the maximum mold adjust velocity.
Allowable inject pressure The maximum allowable inject pressure is defined here.
Allowable hold pressure The maximum allowable hold pressure is defined here.
Max. pressure mold protect
Entry of the maximum pressure for mold protect. If this pressure
is exceeded during mold protect, an error is triggered.
Max. clamp force mold ad-
just
Maximum value of the clamp force.
4.101 Lintab mask
4.101.1 Purpose
This mask is used to load the movement linearization table for the mold height
adjustment of toggle clamp machines.
4.101.2 Description of the mask
The mask consists of the toggle lever characteristics curve which is displayed
tabulated. The left area contains explanations on the linearization table as well
as the number of interpolation points. The table itself is located in the right area.
A linearization table can be loaded from a file with Select.
The linearization table can neither be edited nor deleted in this mask.
KePlast.HMI.KVB
Description of the operating masks
© KEBA 2016
User's manual V3.05 201

Keba Kemro K2 Specifications

General

Brand	Keba
Model	Kemro K2
Category	Controller
Language	English