Keba Kemro K2 User Manual

4.116.2 Description of the mask
The maximum velocities for ejector-, mold-, injection-, mold adjust-and nozzle
movements will be displayed. These values will be calculated automatically
from the maximum set-values and the diameter of the cylinders.
The calculated maximum velocity can be limited to a user defined value. This
user supplied velocity is used for profile value limitation (corresponds to 100%).
Initially a rounded value is determined.
Fig.4-122: Mask "Max. Velocity''
4.116.3 Description of the elements
Mold
Field Description
Max. speed forward
Display and modification of the maximum velocity for the 'Mold
close' movement.
Max. speed backward
Display and modification of the maximum velocity for the 'Mold
open' movement.
Ejector
Field Description
Max. speed forward
Display and modification of the maximum velocity for the 'Ejector
forward' movement.
Max. speed backward
Display and modification of the maximum velocity for the 'Ejector
backward' movement.
KePlast.HMI.KVB Description of the operating masks
© KEBA 2016
User's manual V3.05 227

Keba Kemro K2 Specifications

General

Brand	Keba
Model	Kemro K2
Category	Controller
Language	English