Keba Kemro K2 User Manual

1 Introduction
1.1 Purpose of the document
This document describes all masks of the KePlast.KVB visualization and prin-
cipal operating sequences.
1.2 Target groups, pre-conditions
This document addresses the following group of people with the relevant pre-
qualifications:
Target group Required pre-qualifications
Machine setter
● Basic technical training or in-house training
● Knowledge in:
● safety instructions,
● working mode of machine or plant,
● setting options at the operating installations.
Machine operator
● In-house training
● Knowledge in:
● safety instructions,
● production process.
Service technician
Basic technical education (technical college or corresponding pro-
fessional experience).
Required knowledge:
● functioning of a SPS,
● Safety instructions,
● functioning of the machine or plant,
● diagnosis functions,
● analyzing and resolving machine errors systematically.
1.3 Notes on this document
This manual is integral part of the product. It is to be retained over the entire
life cycle of the product and should be forwarded to any subsequent owners
or users of the product.
1.3.1 Contents of document
● Description of all masks of the visualization.
● Description of the principal operating sequences during the production
process.
● Description of the principal operating sequences during machine adjust-
ment.
KePlast.HMI.KVB
Introduction
© KEBA 2016
User's manual V3.05 17

Keba Kemro K2 Specifications

General

Brand	Keba
Model	Kemro K2
Category	Controller
Language	English