Keba Kemro K2 - Description of the Elements; Production Settings - Tab3; Purpose; Description of the Mask

4.52.3 Description of the elements
Nozzle/mold heating week timer
Field Description
Monday, Tuesday, Wed-
nesday, Thursday, Friday,
Saturday, Sunday
Selection of the weekdays at which the heater shall be started at
the given time.
4.53 Production settings - Tab3
4.53.1 Purpose
Parameters for the production processs can be set in this mask.
4.53.2 Description of the mask
Production seetings for an accumulator, a buzzer and cavity pressure sensors
are specified.
Fig.4-57: Mask "Production settings - Tab3"
4.53.3 Description of the elements
Accumulator
Field Description
Use accumulator Activates the accumulator.
Charging pressure Pressure which is used for charing the accumulator.
Charging velocity Velocity which is used for charging the accumulator.
Description of the operating masks KePlast.HMI.KVB
© KEBA 2016
User's manual V3.05132