4.112.3 Description of the elements
Temperature
Field Description
Drive Actual drive temperature.
Motor temperature Actual motor temperature.
Brake resistor power
Actually consumed energy of the brake resistor
related to the maximum allowed energy.
Drive status
Field Description
Velocity Actual speed of the drive.
Torque Actual torque of the drive.
Actual Current Actual measured current of the drive.
Status word Actual operating state of the drive.
Control mode
Displays the closed-loop control mode that is
actually active (only visible for drive master).
● Pressure Control
● Velocity control
Drive information
Field Description
Drive Name Name of the used drive.
Firmware Version Firmware version of the used drive.
Drive Application Application version of the used drive.
Package Name Description of the speed pump package.
4.113
Drive Tuning
4.113.1 Purpose
Parameters of electrical drives can be displayed and their values changed. For
master and slave(s) a seperate mask is displayed.
Information
The mask is only displayed if the option speed pump is used.
4.113.2 Description of the mask
The mask is divided into sections for setting the control parameters as well as
for loading, saving and editing drive parameters.
Description of the operating masks
KePlast.HMI.KVB
© KEBA 2016
User's manual V3.05220
To Next Page
Loading...
