Record of Revision
Version Date Change in chapter Description changed by
1.00 11-2007 Newly created sam
1.01 06-2008 All Adapted to KePlast V1.16 kalt
1.20 08-2008 Several Adapted to KePlast V1.19 kalt
1.21 02-2009 Several Adapted to Keplast V1.23 kalt
1.22 04-2009 Several Adapted to Keplast V1.24 kalt
1.24 03-2010 Several Adapted to KePlast V1.27 bru/pchr
1.25 04-2010 Several Adapted Auto calibration and heating parameters pchr
1.30 11-2010 Several Adapted to KePlast V1.30 fal
1.31 06-2011 4.50 Adapted to KePlast V1.30e; Adaptation in chapter "Con-
figuration Autocalib"
pchr
2.00 09-2011 all Adapted to KePlast V1.32; HMI- KVB Redesign pchr
2.02 07-2012 all Adapted to KePlast V1.34 pchr, fal
2.04 10-2012 Several Adapted to KePlast V1.35 pchr
2.06 06-2013 Several Adapted to KePlast V1.36 pchr
3.00 03-2014 all Adapted to KePlast V1.38; HMI redesign pchr
3.01 06-2014 4.111 Adapted to KePlast V1.38a pchr
3.02 07-2014 Chapters 4.110-4.113 were described twice; deleted the
double chapters
pchr
3.04 07-2015 Several Adapted to KePlast V1.40 mhf
3.05 01-2016 Several Adapted to KePlast V1.41. Changed description for
Ejector mode "Hold". Added description about vertical
page scrolling. Added descriptions for Simple Scope
mask and velocity calibration masks.
pchr, mhf
KePlast.HMI.KVB Record of Revision
© KEBA 2016
User's manual V3.05 3
To Next Page
Loading...
