365-575-102 Circuit Order: NTP-011
Issue 8.0, July 2002 Page 3 of 4
8. Remove the optical fibers from the OC-3/IS-3
circuit pack(s).
—
9. Remove the circuit pack(s) from the shelf. DLP-514
10. Replace the shelf cover. DLP-511
11. At the CIT, select CONFIGURATION-Update
and execute.
—
12.
NOTE:
Steps 12 through 14 are optional. You may delete the DCC assignment
or leave it in place without causing any interference or harm to other
channels.
At the CIT, select CONFIGURA-
TION-Retrieve-Assignment-DCC to
obtain a DCC Assignment Report.
—
13. From the report, does the DCC assignment exist
for the slot of the circuit pack being removed?
If YES, then continue with Step 14.
If NO, then continue with Step 15.
—
DOITEMSBELOWINORDERLISTED....... FORDETAILS,GOTO
To Next Page
Loading...
Need help?
General