365-575-102 TroubleClearing:
Issue 8.0, July 2002 Page 1 of 2
TAP-137
Clear ‘DS-NE Not Reachable’
1. Before performing the rest of this procedure, refer to IXL-001 and clear any
other alarms that could be responsible for a ‘DS-NE Not Reachable’ condition.
Reference: IXL-001
2. Does the “DS-NE Not Reachable’ condition still persist?
If Yes, continue with Step 4.
If No, then continue with Step 3.
3. STOP! YOU HAVE COMPLETED THIS PROCEDURE.
4.
NOTE:
This condition indicates that one of the network elements (nodes) in the ring
network has not been provisioned "DS-NE."
Determine from office records which node is designated the "Directory Server"
(DS-NE) in the ring network.
5.
NOTE:
When the ring network is in this state, you will probably not be able to
establish remote login to one or more of the other nodes. If a remote login
is possible and if you need additional help, refer to DLP-524. Otherwise,
local CIT assistance will be required at those nodes.
Ask for assistance at the DS-NE location or travel to that location and condi-
tion and connect the CIT to the network element.
Reference: DLP- 501
6. At the CIT connected to the node designated to be the DS-NE, select SECU-
RITY-Set-Network Element and provision the Directory Server parameter
(DS-NE) of that network element to Yes. The remaining nodes in the ring net-
work must be provisioned to No for the Directory Server parameter.
To Next Page
Loading...
Need help?
General