Lucent Technologies FT-2000 OC-48 - Page 508

Administration and Provisioning
8-104 Issue 8.0 July 2002
Performance Monitoring (Cont’d)
- OC-12 Signal Degrade****
(Incoming Signal)
Output AU4 Mapping
10
-5
,[10
-6
], 10
-7
,10
-8
,10
-9
[SONET], SDH
CIT CONFIGURATION-S
et-OC12
[SET-ATTR-rr]
CONFIGURATION-Re
trieve-OC12
[RTRV-ATTR-rr]
- EC-1Signal Degrade¶
(Incoming Signal)
10
-3
,[10
-6
]CITCONFIGURATION-
Set-EC1
[SET-ATTR-rr]
CONFIGURATION-Re
trieve-EC1
[RTRV-ATTR-rr]
- OC-3 Signal Degrade***
(Incoming Signal)
Output AU4 Mapping***
10
-5
,[10
-6
]10
-7
,10
-8
,10
-9
[SONET], SDH
CIT CONFIGURATION-S
et-OC3
[SET-ATTR-rr]
CONFIGURATION-Re
trieve-OC3
[RTRV-ATTR-rr]
OC-3 DCC Assignment¶¶¶
OC-12 DCC Assignment****
- DCC Channel 1,2,3,4,5,6,7,8 CIT CONFIGURATION- CONFIGURATION-
- Orientation
[No Original Value]
user, [network]
Enter-Assignmen
t-DCC
Retrieve-Assignm
ent-DCC
DS3 Port State Provisioning¶¶ CONFIGURATION- CONFIGURATION-
- Port [AUTO], NMON CIT Set-State-T3
[ENT-rr]
Retrieve-T3§§
[RTRV-rr]
- Port [AUTO], IS Automatic None CONFIGURATION-
Retrieve-T3§§
[RTRV-rr]
EC1 Port State Provisioning¶¶
- Port [AUTO], NMON CIT CONFIGURATION-S
et-State-EC1
[ENT-rr]
CONFIGURATION-Re
trieve-EC1§§
[RTRV-rr]
- Port [AUTO], IS Automatic None CONFIGURATION-Re
trieve-EC1§§
[RTRV-rr]
OC3 Port State Provisioning¶¶¶
- Port [AUTO], NMON CIT CONFIGURATION-S
et-State-OC3
[ENT-rr]
CONFIGURATION-Re
trieve-OC3
[RTRV-rr]§§
- Port [AUTO], IS Automatic None CONFIGURATION-Re
trieve-OC3
[RTRV-rr]§§
OC12 Port State Provisioning***
- Port [AUTO], NMON CIT CONFIGURATION-S
et-State-OC12
[ENT-rr]
CONFIGURATION-
Retrieve-OC12
[RTRV-rr]§§
- Port [AUTO], IS Automatic None CONFIGURATION-Re
trieve-OC12
[RTRV-rr]§§
Table 8-5. Provisionable Parameters (FT-2000 OC-48 Add/Drop-Rings Terminal) (Contd)
Parameter Options [Original Value] Method
CIT-PC Input
[TL1 Command]
CIT-PC Report
[TL1 Report]