Craft Interface Terminal Usage
Issue 8.0 July 2002
11-29
CONFIGURATION-
Retrieve
-
Attribute-Control
Retrieves the descriptive name associated with
the user-settable miscellaneous discrete control
output points.
CONFIGURATION-
Retrieve
-Attribute-
Environment
Retrieves the alarm and descriptive name
associated with the user-settable miscellaneous
discrete environmental input points.
CONFIGURATION-
Retrieve
-
Circuit-STS1
Retrieves all cross-connections that make up that
particular circuit path.
CONFIGURATION-
Retrieve
-
Circuit-STS3
Retrieves all cross-connections that make up that
particular circuit path.
CONFIGURATION-
Retrieve
-
Crossconnection-STS1
Retrieves provisioned information on the current
cross-connections in the FT-2000 add/drop-rings
terminal.
CONFIGURATION-
Retrieve
-
Crossconnection-STS3
Retrieves provisioned information on the current
cross-connections in the FT-2000 add/drop-rings
terminal.
CONFIGURATION-
Retrieve
-Date Retrieves provisioned information on current date
and time, and start and stop dates for
daylight-saving time.
CONFIGURATION-
Retrieve
-EC1 Retrieves provisioned information and attributes
of an EC1 port. Also, information on alarm
severity that is implied by failure of the EC1 port,
signal degrade threshold, and the memory
administrative state.
CONFIGURATION-
Retrieve
-Equipment Retrieves the equipage and version information
for the FT-2000 network element.
SECURITY-
Retrieve
-Far End
Communications
Retrieves status information on the far-end
communications access that uses the data
communications channel.
FAULT-
Retrieve
-History Retrieves the maintenance history information on
about 500 events for the FT-2000 network
element.
SECURITY-
Retrieve
-Login Retrieves at the privilege user level a complete
list containing all user logins and their assigned
security level but not their password.
CONFIGURATION-
Retrieve
-Low Speed Retrieves characteristics of a low speed slot.
CONFIGURATION-
Retrieve
-Neighbor Retrieves a list of all Network Elements that are
optically connected to this NE, including
information on connectivity, communication
status, and the product type of each of those
NEs.
Table 11-8. Input (Command) Definitions (Contd)
Selected Input Purpose
To Next Page
Loading...