Craft Interface Terminal Usage
11-30 Issue 8.0 July 2002
CONFIGURATION-
Retrieve
-Map-
Network
Retrieves a current list of all network elements in
the maintenance subnetwork.
CONFIGURATION-
Retrieve
-Map-Ring Retrieves the current values in the addressing
parameters of the nodes in a ring network.
FAULT-
Retrieve
-Network Alarms Generates a report that summarizes the alarm
and status conditions currently being reported for
a specific FT-2000 terminal or FT-2000 repeater
bay/shelf.
SECURITY-
Retrieve
-Network Element Retrieves characteristics of the FT-2000 network
element.
CONFIGURATION-
Retrieve
-OC3 Retrieves provisioning information and the
attributes of an OC3 slot.
CONFIGURATION-
Retrieve
-OC12 Retrieves provisioning information and the
attributes of an OC12 slot.
CONFIGURATION-
Retrieve
-OC48 Retrieves provisioning information and the
attributes of an OC-48 line.
CONFIGURATION-
Retrieve
-Path-Trace Retrieves the provisioned transmit and receive
path traces.
PERFORMANCE-
Retrieve
-PM-EC1 Generates a status report containing EC1 section
and line performance-monitoring data.
PERFORMANCE-
Retrieve
-PM-Line Generates a status report containing OC-48 line
performance-monitoring data.
PERFORMANCE-
Retrieve
-PM-Optics Generates a status report containing OC-48
optics performance-monitoring data.
PERFORMANCE-
Retrieve
-PM-Section Generates a status report containing OC-48
section performance-monitoring data.
PERFORMANCE-
Retrieve
-PM-Start
Time
Generates a status report stating the start time for
measuring the day bins.
PERFORMANCE-
Retrieve
-PM-STS1 Generates a status report containing STS-1 path
performance-monitoring data.
PERFORMANCE-
Retrieve
-PM-T3 Generates a status report containing DS3
performance-monitoring data.
PERFORMANCE-
Retrieve
-PM-TCA Reports a status summary of TCAs reported over
the past 2 days.
PERFORMANCE-
Retrieve
-PMMode-T3 Reports via the P-bit processing or the F and M
bit adjusting processing the determined and
accumulated DS3 path performance monitored
data.
Table 11-8. Input (Command) Definitions (Contd)
Selected Input Purpose
To Next Page
Loading...