Lucent Technologies FT-2000 OC-48 - Page 739

Craft Interface Terminal Usage
Issue 8.0 July 2002
11-31
PERFORMANCE- Retrieve -PM
Threshold-EC1
Reports the performance monitoring TCA
threshold values for the EC1 performance
monitoring data.
PERFORMANCE-
Retrieve -PM
Threshold-Line
Reports the performance monitoring TCA
threshold values for the line performance
monitoring data.
PERFORMANCE-
Retrieve -PM
Threshold-Optics
Reports the performance monitoring TCA
threshold values for the optical performance
monitoring data.
PERFORMANCE-
Retrieve -PM
Threshold-Section
Reports the performance monitoring TCA
threshold values for the section performance
monitoring data.
PERFORMANCE-
Retrieve -PM
Threshold-STS1
Reports the performance monitoring TCA
threshold values for the STS1 performance
monitoring data.
PERFORMANCE-
Retrieve -PM
Threshold-T3
Reports the line and path performance monitoring
TCA threshold values for the T3 performance
monitoring data.
CONFIGURATION-
Retrieve -Protection-
Line
Retrieves the line protection switching
characteristics for the FT-2000 end terminal.
CONFIGURATION-
Retrieve -Protection-
Low Speed
Retrieves the low-speed protection switching
characteristics of the network element.
CONFIGURATION-
Retrieve -Protection-
STS1
Retrieves the current values of the local
protection access state variables.
SECURITY-
Retrieve -Security-Network
Element
Retrieves only at the privileged user level the
security provisioning of login aging, password
aging, and allowed logins of the FT-2000 network
elements.
SECURITY-
Retrieve -Security-Port Retrieves only at the privileged user level the
security provisioning of login aging, password
aging, and allowed logins of the timeout
information on the craft access ports.
CONFIGURATION-
Retrieve -Squelch
Map-STS1
Retrieves the STS-1 level squelch map of an
FT-2000 Add/Drop-Rings Terminal.
CONFIGURATION-
Retrieve -Squelch
Map-STS3
Retrieves the STS-3 level squelch map of an
FT-2000 Add/Drop-Rings Terminal.
FAULT-
Retrieve -State Retrieves the slot, port, and protection switching
state information for the FT-2000 terminal.
Table 11-8. Input (Command) Definitions (Contd)
Selected Input Purpose