Craft Interface Terminal Usage
Issue 8.0 July 2002
11-175
64.
NOTE:
You are now going to enter and delete a cross-connection. You will retrieve
a cross-connection report and select an appropriate address (unused slot
and tributary). Then, you will make an add cross-connection and verify it.
And finally, you will remove the cross-connection and verify its removal.
NOTE:
Other types of cross-connections are explained in detail in Volume I,
Section 8, "Administration and Provisioning."
Depress function key to return to the input mode and select the
CONFIGURATION-Retrieve-Crossconnection-All command.
65. Press the key to obtain an STS-1 Cross-Connection Map Report.
ENTER
To Next Page
Loading...
Need help?
General