NTP-007: Acceptance 365-575-102
Page4of4 Issue8.0,July2002
Acceptance: NTP-007---+---TAD-100
|---DLP-501
|---DLP-504
|---DLP-506
|---DLP-508
|---DLP-509
|---DLP-524
|---DLP-530
16.
NOTE:
The FE ACTY LED will only light if the Remote Activity Report parameter of
the SECURITY-Set-Far End Communications command has been
enabled.
AreboththeNE ACTY and the FE ACTY LEDs
off at the local FT-2000 add/drop-rings terminal?
If YES, then continue with Step 17.
If NO, then the trouble must be referred to
the group that installed it.
—
17. If required, notify personnel at the remote
maintenance site (OS center) that the FT-2000 ring
network is ready for any operational tests they wish to
perform using the X.25 link.
—
18. The FT-2000 ring network has passed this
acceptance test and is now ready to provide service.
—
DO ITEMS BELOW IN ORDER LISTED . . . . . . . FOR DETAILS, GO TO
To Next Page
Loading...