Parker EME
Motion control
192-121102 N04 June 2008 331
VelocityOfRegMove
REAL
Velocity transmitted to the RegMove command
(cache memory)
Note: The input is connected to the
VelocityForRegMove output in the simplest case.
CStatus2OfRegMove
WORD reserved!
StatusMotor_off
BOOL Motor is currentless (TRUE)
StatusMotor_standstill
BOOL
Status motor is energized at standstill (setpoint
value) (TRUE)
CStatus1
WORD reserved!
CStatus2
WORD reserved!
Notes:
You can call up directly the help for the Compax3 Profidrive device (I20T11) via
the help intaller (C3 ServoManager "?" Start C3 ServoManager Help Installer...)
(select and open in the left window).
On the Compax3 DVD you will find an application example with additional
explanations for the use of this module:
C3 DVD directory .....\Examples\Profidrive with T30T40\
To Next Page
Loading...
