Procedure
Web Installation on the Database Server
B-11
• Click on Search by IP in the upper row menu to open the Enter Switch or Access
Point IP Address dialog box. The following figure shows this box for the Database
Server.
• Enter the IP Address of the NIC set in Entering the NIC IP Address and click OK
to display the Information Center Web
TM
Login window.
• Log in using the account that was added in “Web User Access Config Tool” on
page B-6
• Assign a new user and password
• Log out and log back in using the new user
• Verify patient lists and data from all Database Servers are present
Note To verify that the most recent patient data have been stored and can be accessed, the
Information Center selected must be in monitoring mode.
– Close the Web Main Menu window to return to the Service window.
To Next Page
Loading...
Need help?
General