RHK Technology R9 - RHK STM Beetle - UHV300;700; Confirm Connections to Microscope; Figure F.1. the Approach Procedure Panel; Table F.1. Preconfigured Approach Systems

Approach
126
Figure F.1. The Approach Procedure Panel
Note
The Approach Procedures can be different for each microscope! The Pan Approach
Procedures are shown above.
The following Approach Systems have been preconfigured:
Table F.1. Preconfigured Approach Systems
Microscope
Required Approach Items
RHK STM Beetle - UHV300/700
PPC200 STM
RHK AFM/STM Beetle - UHV350/750
PPC200 AFM, PMC100, TTL Out 0
RHK Pan - UHV900
PMC100, TTL Out 0
F.1. RHK STM Beetle - UHV300/700
This section will describe the Approach Procedures for the RHK STM Beetle.
F.1.1. Confirm Connections to Microscope
The RHK STM Beetle microscope requires the RHK PPC200 for coarse motion. The PPC200 accepts
three inputs from the R9 Controller's high voltage outputs: +X, -X, Common. The ±X inputs are typically
supplied equal signals with opposite polarities.