RHK Technology R9 - Figure J.34. Configure Post-Initialize and Pre-Shutdown Procedures

Details on Procedure Space Constructions
167
procedure is run before the R9 Controller is Shutdown. An example procedure that may be run before the
controller is Shutdown is to make the probe take several coarse steps away from the sample.
The Post-Initialize and Pre-Shutdown procedures can be selected from Hardware Space on the
Properties panel when no hardware item is selected.
Figure J.34. Configure Post-Initialize and Pre-Shutdown Procedures
Note
In some cases, it could be useful to have a Procedure composite that is contained inside
another Procedure composite.