STRASBAUGH, INC.
7AF SECS/GEM Interface Ver. 1.9 February 19, 2002 6-15
Strasbaugh Confidential
6-15
6.36 S2F36 - Link Event Report Acknowledge
S2F36 * H<-E
<B [1] LRACK> . * LRACK - Acknowledge Code
Normally, LRACK is zero. Any non-zero LRACK indicates the Equipment has rejected the entire S2F35 message.
LRACK Description
0x00 OK
0x02 Denied. Invalid format.
0x03 Denied. At least one CEID link already defined
0x04 Denied. At least one CEID does not exist.
0x05 Denied. At least one RPTID does not exist.
Other Equipment has rejected the S2F35 message
6.37 S2F37 - Enable/Disable Event Report
S2F37 W * H<-E
<L [2]
<BOOLEAN CEED> * Coll. Event Enable
<L
<U4 CEID> * Collection Event ID
...
>
> .
The Host enables reporting for a list of Collection Event IDs, or disables reporting for the list.
CEED is "True" to indicate Enabling, or "False" to indicate Disabling reporting for the specified CEIDs.
The Host can enable or disable all CEIDs by using the following special format:
S2F37 W * H->E
<L [2]
<BOOLEAN CEED> * Coll. Event Enable
<L>
> .
6.38 S2F38 - Enable/Disable Event Report Acknowledge
S2F38 * H<-E
<B [1] ERACK> . * ERACK - Acknowledge Code
Normally, ERACK is zero. Any non-zero ERACK indicates the Equipment has rejected the entire S2F37 message.
ERACK Description
0x00 OK
0x01 Denied. At least one CEID does not exist.
To Next Page
