Strasbaugh nTellect 7AF - Page 1506

STRASBAUGH, INC.
6-16 February 19, 2002 7AF SECS/GEM Interface Ver. 1.9
Strasbaugh Confidential
6.39 S2F39 - Multi-Block Inquire
S2F39 W * H->E
<L [2]
<U4 DATAID> * DATAID
<U4 DATALENGTH>
> .
The Host may send this Inquire/Grant transaction preceding any multiblock S2F33 or S2F35. For this Equipment, this
Inquire/Grant is optional. The Equipment accepts it, but ignores it, commits no resources, and initiates no Conversation
Timeout. The Equipment accepts multiblock S2F33 or S2F35 even if not preceded by the Inquire/Grant.
6.40 S2F40 - Multi-Block Grant
S2F40 * H<-E
<B [1] 00> . * GRANT
The Equipment always sends GRANT value "0".
6.41 S2F41 - Remote Command with Parameters
S2F41 [W] * H->E
<L [2]
<A RCMD> * Remote command string
<L
<L [2]
<A CPNAME> * Command Parameter Name
<CPVAL> * Command Parameter Value
>
...
>
> .
The Host sends a command with parameters to the Equipment. If a command has no parameters, S2F41 has the following
format:
S2F41 [W] * H->E
<L [2]
<A RCMD> * Remote Command String
<L>
> .
The 7AF ignores case when performing validity checks on the RCMD and CPNAME strings. The ASCII strings described
below may be sent in any combination of upper and lower case characters.
The Host may optionally set the W-Bit to "1" in S2F41. If so, the Equipment replies with S2F42.