Strasbaugh nTellect 7AF - Page 1519

STRASBAUGH, INC.
7AF SECS/GEM Interface Ver. 1.9 February 19, 2002 6-29
Strasbaugh Confidential
6-29
The Equipment generates a value for DATAID to uniquely identify this Conversation. If S6F3 is multiblock, the
Equipment first sends the S6F5/S6F6 Inquire/Grant transaction, and DATAID in S6F3 will match DATAID in S6F5.
If the CEID is enabled, but no Reports are linked to this CEID, S6F3 has the following special format:
S6F3 [W] * H<-E
<L [3]
<U4 DATAID> * DATAID
<U4 CEID> * Collection Event ID
<L>
> .
Equipment Constant "Wbits6" controls whether the Equipment sends S6F3 with W-Bit "1" (Reply Expected) or "0" (No
Reply Expected).
6.64 S6F4 - Annotated Event Report Acknowledge
S6F4 * H->E
<B [1] 00> . * ACKC6
The Host acknowledges the Event Report. The Equipment ignores ACKC6.
6.65 S6F5 - Multi-Block Data Send Inquire
S6F5 W * H<-E
<L [2]
<U4 DATAID> * DATAID
<U4 DATALENGTH>
> .
The Equipment sends this Inquire/Grant transaction preceding any multiblock S6F3, S6F9, S6F11, or S6F13.
The DATAID specified here will appear in the following S6F3, S6F9, S6F11, S6F13.
DATALENGTH value is the total number of text bytes (excluding SECS block headers) in the following S6F3, S6F9,
S6F11, or S6F13 message.
6.66 S6F6 - Multi-Block Grant
S6F6 * H->E
<B [1] GRANT6> . * GRANT6
The Host grants permission for the Equipment to send a multi-block event report.