Strasbaugh nTellect 7AF - Page 179

Operations and Maintenance Manual Operator Functions
Version 1.2 - June 2004 8 - 47
15. Rotate a receive turret away from the robot and place an empty cassette on
it:
Operator Action Explanation/Screen Display
a. Receive cassette
icon Touch the desired "Receive" cassette icon to
rotate the turret 180 °.
b. Place an empty cassette on the turret.
16. Rotate the turret to present the cassette to the robot:
Operator Action Explanation/Screen Display
• Receive 1 cassette
icon Touch the "Receive 1" cassette icon to rotate the
turret 180 °.
17. To prepare to process a second cassette, repeat Steps 15. and 16..,
immediately above.
18. Check the screen for error message fault displays.
a. If no faults are displayed, go on to Step 19.
b. If faults are displayed, refer to the Troubleshooting chapter of this
manual.
19. Start the cycle:
Operator Action Explanation/Screen Display
• Start Cycle Touch the "Start Cycle" button to start the
automatic grind cycle.