Operations and Maintenance Manual Machine Setup
Version 1.2 - June 2004 9 - 9
RECIPE PARAMETER SETTINGS AND INFORMATION AVAILABLE AT
THE WAFER RECIPES MENU
The section below provides details on the entries to be made and the information
displayed at the Wafer Recipes menu.
COARSE AND FINE GRIND RECIPE STEPS AND PARAMETERS
Grind Wheel Speed
The grind wheel spindle speed (in revolutions per minute), which remains constant
through the coarse (or fine) grind cycle, is set at this location. Grind wheel speed
settings may range from 500 to 4500 RPM.
Grind Wheel
Speed
value entered = grind wheel speed (coarse or fine) in RPM.
To Next Page
Loading...
