Strasbaugh nTellect (Model 7AF) Wafer Grinder
11 - 100 Version 1.2 - June 2004
Note: You may need to open the adjacent cassette door and reach around
if you find you need to tap the platform from the inside.
a. Retest by repeating Step 3., above in this section. If needed, repeat the
adjustment.
b. When the position meets the goal, go on to the Platform Leveling
Adjustment, below.
D. Platform Leveling Adjustment
1. Place a circular bubble level on the grooved black anodized aluminum cassette
aligning plate closest to the outside of the machine.
To Next Page
Loading...
