Strasbaugh nTellect 7AF - Page 387

Operations and Maintenance Manual Mechanical Maintenance Procedures
Version 1.2 - June 2004 11 - 127
CHANGING THE WORK CHUCKS
Tools Required
• 3/16-in. hex key
• 5/32-in. hex key
• D.I. water
• lint-free wipes
• replacement chuck
• 3/32-in. hex key
• adjustable torque wrench with a 5/16-in. hex key fitting
• 6-inch scale
Change Procedure
1. Following the procedures found in the Basic Operation section of this chapter,
power up and home the machine.