Strasbaugh nTellect (Model 7AF) Wafer Grinder
12 - 12 Version 1.2 - June 2004
FACTOR
x 1
x 10
x 100
x 1000
The four factor buttons, located just below the left and right
work chucks, select the size of component movements.
Refer to the chart below for the resulting movement sizes
when factor buttons are used in combination with the arrow
keys, plus keys, or minus keys.
Touch the Factor of 1 (x 1) button before touching an arrow
key, a plus key, or a minus key to multiply that action by 1.
Touch the Factor of 10 (x 10) button before touching an
arrow key, a plus key, or a minus key to multiply that action
by 10.
Touch the Factor of 100 (x 100) button before touching an
arrow key, a plus key, or a minus key to multiply that action
by 100.
Touch the Factor of 1000 (x 1000) button before touching
an arrow key, a plus key, or a minus key to multiply that
action by 1000.
To Next Page
Loading...
