Strasbaugh nTellect (Model 7AF) Wafer Grinder
12 - 24 Version 1.2 - June 2004
USING THE OUTPUT CONTROL/INPUT STATUS MENU'S MANUAL CONTROLS - AN EXAMPLE
Follow the steps below to move the spin-rinse spindle (chuck) to its up position:
Touch to Select Explanation/Screen Display
1. Machine Maint At the Main Menu screen, touch the "Machine
Maint" button to select the "Machine Maintenance
menu.
Displays:
Machine Maintenance menu
2. Inputs/
Outputs At the Machine Maintenance menu, touch the
"Inputs/Outputs" button to select the Output
Control/Input Status menu.
Displays: Output Control/Input Status menu
To Next Page
Loading...
