Strasbaugh nTellect (Model 7AF) Wafer Grinder
13 - 16 Version 1.2 - June 2004
2. At the Output Control/Input Status menu, exercise the cylinder:
Touch to Select Explanation/Screen Display
a. Machine Maint At the Main Menu screen, touch the "Machine
Maint" button to select the Machine
Maintenance menu.
Displays:
Machine Maintenance menu
b. Inputs/Outputs At the Machine Maintenance menu screen, touch
the "Inputs/Outputs" button to select the Output
Control/Input Status menu.
Displays:
Output Control/Input Status menu
c. Send 1 Cassette
Turret icon Touch the "Send 1 Cassette
Turret icon", located in the Output Control
section of the menu, to rotate the cassette
turret.
d. Send 1 Cassette
Turret icon Touch the "Send 1 Cassette
Turret icon" again to rotate the cassette turret
once more.
To Next Page
Loading...
