Strasbaugh nTellect (Model 7AF) Wafer Grinder
15 - 8 Version 1.2 - June 2004
REMOVING PROTECTION FROM RECIPES
This procedure removes the “read only” attribute from recipe files, permitting
modification. To protect a recipe after modification, follow the steps for Protecting
Recipes (above in this chapter).
Follow the steps below to remove protection from recipe files:
1. Touch the 7AF in the 7AF logo to exit the 7AF software.
2. At the prompt, type Unlock and press the Enter key.
The batch file will remove the “read only” attribute from the recipe files.
3. When the prompt is again displayed, type RUN7AF and press the Enter key to
restart the 7AF software.
All recipes may now be modified.
To Next Page
Loading...
