Configuring MAC VLAN MAC VLAN Configuration
Configuration Guide
171
The following example shows how to enable MAC VLAN for port 1/0/1.
Switch#configure
Switch(config)#interface gigabitEthernet 1/0/1
Switch(config-if)#mac-vlan
Switch(config-if)#show mac-vlan interface
Port STATUS
------- -----------
Gi1/0/1 Enable
Gi1/0/2 Disable
......
Switch(config-if)#end
Switch#copy running-config startup-config
To Next Page
Loading...
Need help?
General