Configuring Layer 2 Multicast Configuration Examples
Configuration Guide
351
Global Report Suppression :Disable
Global Authentication Accounting:Disable
Enable Port:Gi1/0/1-4
Enable VLAN:10
5.2 Example for Configuring Multicast VLAN
5.2.1 Network Requirements
Host B, Host C and Host D are in three different VLANs of the switch. All of them want to
receive multicast data sent to multicast group 225.1.1.1.
5.2.2 Configuration Scheme
Create a multicast VLAN and add the router port and ports connected to multicast
members to the multicast VLAN. In this case, all multicast data will only be processed in the
multicast VLAN.
5.2.3 Network Topology
As shown in the following network topology, Host B, Host C and Host D are connected to
port 1/0/1, port 1/0/2 and port 1/0/3 respectively. Port 1/0/1, port 1/0/2 and port 1/0/3
belong to VLAN 10, VLAN 20 and VLAN 30 respectively. Port 1/0/4 is connected to the
multicast network in the upper layer network. These 4 ports are all Untagged ports.
To Next Page
Loading...
Need help?
General