Configuration Guide 591
Configuring Network Security AAA Configuration
7.1.5 Configuring the AAA Application List
Choose the menu Network Security > AAA > Global Config to load the following page.
Figure 7-8 Configure Application List
Follow these steps to configure the AAA application list.
1) In the AAA Application List section, select an access application and configure the
Login list and Enable list.
Module Displays the configurable applications on the switch: telnet, ssh and http.
Login List Select a previously configured Login method list. This method list will
authenticate the users trying to log in to the switch.
Enable List Select a previously configured Enable method list. This method list will
authenticate the users trying to get administrative privileges.
2) Click Apply.
7.1.6 Configuring Login Account and Enable Password
The login account and Enable password can be configured locally on the switch or centrally
on the RADIUS/TACACS+ server(s).

On the Switch
The local username and password for login can be configured in the User Management
feature. For details, refer to Managing System.
To configure the local Enable password for getting administrative privileges, choose the
menu Network Security > AAA > Global Config to load the following page.
Figure 7-9 Configure Enable Password
Specify the Enable password in the Enable Admin section, and click Apply.
To Next Page
Loading...
Need help?
General