TP-Link T1600G-52PS - 5. Appendix: Default Parameters

Configuring DHCP Appendix: Default Parameters
Configuration Guide
425
5
Appendix: Default Parameters
Default settings of DHCP Relay are listed in the following table.
Table 5-1 Default Settings of DHCP Relay
Parameter Default Setting
DHCP Relay
DHCP Relay Disable
Option 82 Support Disable
Existed Option 82 field Keep
Customization Disable
Circuit ID None
Remote ID None
DHCP Interface Relay
Interface ID None
Server Address None
DHCP VLAN Relay
Interface ID None
VLAN ID None
Server Address None
Default setting of DHCP Client is listed in the following table.
Table 5-2 Default Setting of DHCP Client
Parameter Default Setting
DHCP Client Disable