TP-Link T1600G-52PS - Binding Profile and Member Ports

Configuring Layer 2 Multicast Configuring MLD Snooping
Configuration Guide
317
3.1.7 Binding Profile and Member Ports
With this function, you can configure each port’s filtering profile and the number of
multicast groups a port can join. Choose the menu Multicast > MLD Snooping > Profile
Binding to load the following page.
Figure 3-8 Profile Binding
Binding Profile and Member Ports
Follow these steps to bind the profile to the port.
1) Select the port to be bound, and enter the Profile ID in the Profile ID column.
Select Select the port to be bound.
Port Displays the port number.
Profile ID Enter the profile ID you create to bind the profile to the port. One port can only be
bound to one profile.
ClearBinding Click to clear the binding between the profile and the port.
2) Click Apply.