Configuration Guide 577
Configuring Network Security 802.1X Configuration
6.1.3 Configuring 802.1X on Ports
Choose the menu Network Security > 802.1X > Port Config to load the following page.
Figure 6-8 Port Config
Configure 802.1X authentication on the desired port and click Apply .
Status Enable 802.1X authentication on the port.
Guest VLAN Select whether to enable Guest VLAN on the port.
Control Mode Select the Control Mode for the port. By default, it is Auto.
Auto: If this option is selected, the port can access the network only when it is
authenticated.
Force-Authorized: If this option is selected, the port can access the network without
authentication.
Force-Unauthorized: If this option is selected, the port can never be authenticated.
Control Type Select the Control Type for the port. By default, it is MAC Based.
MAC Based: All clients connected to the port need to be authenticated.
Port Based: If a client connected to the port is authenticated, other clients can access
the LAN without authentication.
Authorized Displays whether the port is authorized or not.
LAG Displays the LAG the port belongs to.
To Next Page
Loading...
Need help?
General