Configuration Guide 282
Configuring Layer 2 Multicast IGMP Snooping Configurations
Configuring IGMP Accounting Globally
To use this function, you should also enable Authentication, Authorization and Accounting
(AAA) globally and configure RADIUS server on the switch.
Follow these steps to enable IGMP Accounting globally.
1) Enable IGMP Accounting globally.
Accounting Select Enable to enable IGMP Snooping accounting.
2) Click Apply.
Configuring IGMP Authentication on the Port
To use this function, you should also enable AAA globally and configure RADIUS server on
the switch.
Follow these steps to enable IGMP Authentication on the port.
1) Specify the ports and enable IGMP Authentication.
IGMP
Authentication
Select one or more ports and select Enable in the IGMP Authentication column.
2) Click Apply.
2.1.10 Configuring Static Member Port
This function allows you to specify a port as a static member port in the multicast group.
Choose the menu Multicast > Multicast Table > Static IPv4 Multicast Table to load the
following page.
To Next Page
Loading...
Need help?
General