TP-Link T1600G-52PS - Configuring 802.1 X Globally

Configuration Guide 580
Configuring Network Security 802.1X Configuration
Switch#configure
Switch#aaa enable
Switch(config)#radius-server host 192.168.0.100 key 123456 auth-port 1812 acct-port
1813
Switch(config)#aaa group radius radius1
Switch(aaa-group)#server 192.168.0.100
Switch(aaa-group)#exit
Switch(config)#aaa authentication dot1x default radius1
Switch(config)#aaa accounting dot1x default radius1
Switch(config)#show radius-server
Server Ip Auth Port Acct Port Timeout Retransmit Shared key
192.168.0.100 1812 1813 5 2 123456
Switch(config)#show aaa group radius1
192.168.0.100
Switch(config)#show aaa authentication dot1x
Methodlist pri1 pri2 pri3 pri4
default radius1 -- -- --
Switch(config)#show aaa accounting dot1x
Methodlist pri1 pri2 pri3 pri4
default radius1 -- -- --
Switch(config)#show aaa global
AAA global status: Enable
Switch(config)#end
Switch#copy running-config startup-config
6.2.2 Configuring 802.1X Globally
Follow these steps to configure 802.1X globally:
Step 1 configure
Enter global configuration mode.