TP-Link T1600G-52PS - Configuring MLD Snooping; Configuring MLD Snooping Globally

Configuration Guide 306
Configuring Layer 2 Multicast Configuring MLD Snooping
3
Configuring MLD Snooping
3.1 Using the GUI
3.1.1 Configuring MLD Snooping Globally
Choose the menu
Multicast > MLD Snooping > Snooping Config
Figure 3-1 MLD Snooping Global Config
Enabling MLD Snooping Globally
Before configuring functions related to MLD Snooping, enable MLD Snooping globally first.
1) Select Enable to enable MLD Snooping globally.
2) Click Apply.
(Optional) Configuring Unknown Multicast
Unknown Multicast decides how to process the multicast data when its destination
multicast address is not in the multicast forwarding table of the switch.