Configuration Guide 588
Configuring Network Security AAA Configuration
Shared Key Enter the shared key between the TACACS+ server and the switch. The
TACACS+ server and the switch use the key string to encrypt passwords and
exchange responses.
Server Port Specify the TCP port used on the TACACS+ server for AAA. The default setting is
49.
2) Click Add to add the TACACS+ server on the switch.
7.1.3 Configuring Server Groups
The switch has two built-in server groups, one for RADIUS servers and the other for
TACACS+ servers. The servers running the same protocol are automatically added to the
default server group. You can add new server groups as needed.
Choose the menu Network Security > AAA > Server Group to load the following page.
Figure 7-4 Add New Server Group
The two default server groups in the list cannot be edited or deleted. You can follow these
steps to configure a new server group:
1) In the Add New Server Group section, configure the group name and the server type,
and click Add to add the new server group.
Server Group Specify a name for the server group.
Server Type Select the server type for the group. The following options are provided: RADIUS
and TACACS+.
2) Select the newly added group, and click edit in the Operation column.
To Next Page
Loading...
