Configuring Layer 2 Multicast Appendix: Default Parameters
Configuration Guide
373
6
Appendix: Default Parameters
6.1 Default Parameters for IGMP Snooping
Table 6-1 Default Parameters of IGMP Snooping
Function Parameter Default Setting
Global Settings of IGMP
Snooping
IGMP Snooping Disabled
Unknown Multicast Forward
Report Message Suppression Disabled
Router Port Time 300 seconds
Member Port Time 260 seconds
Last Listener Query Interval 1 second
Last Listener Query Count 2
IGMP Snooping Settings on
the Port
IGMP Snooping Disabled
Fast Leave Disabled
IGMP Snooping Settings in the
VLAN
Enable or Not Disabled
Router Port Time 0, use global settings.
Member Port Time 0, use global settings.
Multicast VLAN
Multicast VLAN None
Router Port Time 0, use global settings.
Member Port Time 0, use global settings.
Replace Source IP
0.0.0.0, indicating no
replacement.
IGMP Snooping Querier
Enable or Not Disabled
Query Interval 60 seconds
Max Response Time 10 seconds
General Query Source IP 192.168.0.1
To Next Page
Loading...
Need help?
General