TP-Link T1600G-52PS - 6. Appendix: Default Parameters

Configuring Spanning Tree Appendix: Default Parameters
Configuration Guide
263
6
Appendix: Default Parameters
Default settings of the Spanning Tree feature are listed in the following table.
Table 6-1 Default Settings of the Global Parameters
Parameter Default Setting
Spanning-tree Disable
Mode STP
CIST Priority 32768
Hello Time 2 seconds
Max Age 20 seconds
Forward Delay 15 seconds
TxHoldCount 5 pps
Max Hops 20 hops
Table 6-2 Default Settings of the Port Parameters
Parameter Default Setting
Status Disable
Priority 128
Ext-Path Cost Auto
In-Path Cost Auto
Edge Port Disable
P2P Link Auto
MCheck ------
Table 6-3 Default Settings of the MSTP Instance
Parameter Default Setting
Status Disable
Priority 32768