Managing System System Tools Configurations
Configuration Guide
45
4
System Tools Configurations
With system tools configurations, you can:

Configure the boot file

Restore the configuration of the switch

Back up the configuration file

Upgrade the firmware

Reboot the switch

Configure the reboot schedule

Reset the switch
4.1 Using the GUI
4.1.1 Configuring the Boot File
Choose the menu System > System Tools > Boot Config to load the following page.
Figure 4-1 Configuring the Boot File
Follow these steps to configure the boot file:
1) In the Boot Table section, select one or more units and configure the relevant
parameters.
To Next Page
Loading...
Need help?
General