TP-Link T1600G-52PS - Configuring DHCP Snooping on Ports

Configuration Guide 553
Configuring Network Security DHCP Snooping Configuration
VLAN ID Specify the VLAN ID in the format shown on the page.
VLAN
Configuration
Display
Displays the VLANs that have been enabled with DHCP Snooping.
3) Click Apply.
3.1.2 Configuring DHCP Snooping on Ports
Choose the menu Network Security > DHCP Snooping > Port Config to load the following
page.
Figure 3-2 Port Config
Follow these steps to configure DHCP Snooping on the specified port:
1) Select one or more ports and configure the parameters.
Trusted Port Select Enable to set the port that is connected to the DHCP server as a trusted
port. Select Disable to set the other ports as untrusted ports.