Configuring Layer 2 Multicast IGMP Snooping Configurations
Configuration Guide
301
Step 3 show ip igmp snooping querier [vlan
vlan-id
]
Show the detailed IGMP querier configuration.
Step 4 end
Return to privileged EXEC mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable IGMP Snooping and IGMP Querier in VLAN
4, set the query interval as 100 seconds, the max response time as 20 seconds, and the
general query source IP as 192.168.0.1:
Switch#configure
Switch(config)#ip igmp snooping
Switch(config)#ip igmp snooping querier vlan 4 query-interval 100
Switch(config)#ip igmp snooping querier vlan 4 max-response-time 20
Switch(config)#ip igmp snooping querier vlan 4 general-query source-ip 192.168.0.1
Switch(config)#show ip igmp snooping querier
VLAN 4:
--------------
Maximum Response Time: 20
Query Interval: 100
General Query Source IP: 192.168.0.1
Switch(config)#end
Switch#copy running-config startup-config
2.2.9 Configuring Multicast Filtering
Creating Profile
Step 1 configure
Enter global configuration mode.
Step 2 ip igmp profile
id
Create a new profile and enter profile configuration mode.
To Next Page
Loading...
Need help?
General