Configuration Guide 676
Configuring Maintenance Monitoring the System
2.2 Using the CLI
2.2.1 Monitoring the CPU
On privileged EXEC mode or any other configuration mode, you can use the following
command to view the CPU utilization:
show cpu-utilization
View the memory utilization of the switch in the last 5 seconds, 1minute and 5minutes.
The following example shows how to monitor the CPU:
Switch#show cpu-utilization
Unit | CPU Utilization
No. | Five-Seconds One-Minute Five-Minutes
------+-------------------------------------------------
1 | 13% 13% 13%
2.2.2 Monitoring the Memory
On privileged EXEC mode or any other configuration mode, you can use the following
command to view the memory utilization:
show memory-utilization
View the memory utilization of the switch in the last 5 seconds, 1minute and 5minutes.
The following example shows how to monitor the memory:
Switch#show memory-utilization
Unit | Current Memory Utilization
------+----------------------------
1 | 74%
To Next Page
Need help?
General