Configuration Guide 570
Configuring Network Security DoS Defend Configuration
Step 5 end
Return to privileged EXEC mode.
Step 6 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable the DoS Defend type named land:
Switch#configure
Switch(config)#ip dos-prevent
Switch(config)#ip dos-prevent type land
Switch(config)#show ip dos-prevent
Type Status
--------- ------
Land Attack Enabled
Scan SYNFIN Disabled
Xmascan Disabled
......
Switch(config)#end
Switch#copy running-config startup-config
To Next Page
Loading...
