Configuration Guide 619
Configuring Network Security Configuration Examples
Figure 8-20 Create Server Group
5) On the same page, select the newly created server group and click edit to load the
following page. Select 192.168.0.10 from the drop-down list, and click Add to add
RADIUS Server 1 to the group. Then select 192.168.0.20 from the drop-down list, and
click Add to add RADIUS Server 2 to the group.
Figure 8-21 Add Servers to Server Group
6) Choose the menu Network Security > AAA > Method List to load the following page.
Specify the Method List Name as Method-Login, select the List Type as Authentication
Login, and select the Pri1 as RADIUS1. Click Add to set the method list for the Login
authentication.
Figure 8-22 Configure Login Method List
To Next Page
Loading...
Need help?
General